DK32S Drill Motor

Maximum confort and working safety.

« Previous Product :: Next Product »

DK32S Drill Motor

DK32S Drill Motor

 

The new DK32S boasts output power to 2300W, as well as an increase of operator comfort and working safety.
The DK32 offers a maximum in economy and corresponds to high quality standards and is suitable for a continual and professional operation.
The excellent efficiency from motor and gear guarantees an very high working capacity. 

Features

3-speed change gearing

Large drilling range (s. techn. Data) with favourable adapting of the speed to the respective drilling diameter.

Oil-bath lubrication

Optimal gear lubrication for high efficiency, high durability and less maintenance. The new and high effective oil pump takes care for an optimal lubrication for the first fast gear step, even in vertical operation.

Overload clutch

This novel multiple disc clutch protects operator, machine and tool against high mechanical overload. The bigger number of friction surfaces guarantees a nearly constant release torque even after many hundreds of release cycles of the clutch.
At proper use consequently a readjustment between the usual intervalls of maintenance is not longer required.

Intellitronic

The new electronic system starts the motor by means of a microcontroller soft and thus avoids a too high start current.
When exceeding the overcurrent threshold the electronic is showing this by a pulsating of the motor. If the operator decreases the feed power, the motor works normally again. If the operator does not decrease the feed power the electronic switches the motor off after some seconds. After this action the motor can be started immediately. It is not required to wait before starting again like on a thermal motor overload switch.
Moreover the Intellitronic is registering the motor temperature and decreases the overload threshold when exceeding the operating temperature.
Thus the Intellitronic avoids reliable overload conditions and increases safety, the operators comfort and the motors life time.

Start current limiter

Two-stage start of the motor takes care of reliable operation even with quick-action main fuses (for 230 V version only).

DC-coated drill spindle with protective sleeves

Sleeves on the spindle made from stainless steel in addition with a high quality surface treatment allow for maximum protection against rust and abrasion of the running surface under the rotary shaft seals.

Antifriction Element 

This smart ring fixed on the drill spindle is able to reduce the release torque for loosening the drill bit considerably.

Metal Casing

Motor and gearbox are made from aluminum. This makes the DK32S mechanically and thermally stable and durable contrary to plastics cases.

 


Technical Data

Motor 3200W
Output Power 2300W
Load Speed /min 300/590/930
Length w/out handle 488mm
Weight 11.9kg
Drilling diameter 35-250kg
Tool fixture 1 1/4

Features

Click to enlarge images

DK32S Drill Motor

DK32S Drill Motor