Ideal for single or row drilling. Higher efficiency by the simultaneous use of two or more units. Higher service life of the diamond coring bit (up to 30 %) by the use of a constant feed pressure. Optimal load of the drill engine by the use of a constant feed pressure especially, if the conditions allow it, during drilling's nearby a second drill machine or when other extra works like water draining are performed.
Attaching the Subito feed gear to the Demco Technic AG drill rigs is very easy. The feed gear is simply mounted and locked in place, either on the left or right of the drill depending on space requirement. The Subito feed gear is compatible with Nino, Piccolo and Sumo drill rigs. Attachment to drill rigs from other manufacturers on request.
- Drills unattended
- Drills faster as with manual feed
- Feed pressure from 6 up to 14 A
- Automatic shutdown of drill engine, feeder and water
- Automatic feed reduction in reinforcement
- Electric fast-push forward and- push backward
For an extra charge, Demco Technic AG offers a carrying case. You can store all Subito feed gear components in the case. Foam inlays ensure that all components have an individually specified place and are ideally protected against damage during transportation.
The control box is the central control unit for the Subito feed gear. All functions can be operated via the integrated keyboard. By exchanging the connector cable the control box can be used individually for drill engines of 230 Volt as well as 400 Volt.
|Power Supply||400 Volt / 220 Volt|
|Control Voltage||30 Volt|
|Water on / off||Magnet alve balanced|
|Control box||L = 320 mm x B = 100 mm x H = 170 mm|
|Feed gear||L = 320 mm x B = 100 mm x H = 170 mm|
|carry Case||With compartment|