Gamma Wall Saw

 

Unique combination of flexibility, ligth weight and powerWith a total weight of only 24.5 kg

 

« Previous Product :: Next Product »

Gamma Wall Saw

Gamma Wall Saw

 

GAMMA is the lightest wall saw on the market with this incredible performance. GAMMA allows you to work with one person, be faster and at the end of the day more economical in your daily business. In other words, the highest flexibility for all challenges.

Flush cutting
The fastening holes for flush cutting are drilled in to the inside flange. You do not use a flush cutting flange. The distance between the middle dowels and the saw blade mains the same.

Joint cutting
Above on the picture you can see that the 2 adjusting screws are holding the saw in the right position. With the 2 adjusting screws you have the opportunity to move the saw within 50 mm. That means that you can make 2 cuts without moving the guide rail within 50 mm.

Feeder / Lowering device
Feeder speeds forward or backward are fully adjustable. The lowering device is 360 degrees endless rotating. Both functions can be operated with the remote control.

 

 

 


Technical Data

Drive motor Water cooled
Capacity 11 kW with 25 Amp.
Drive motor Stepless 0-1040 rpm
Operating Voltage 3 x 400 Volt / 50 Hz
Control Voltage 30 Volt DC Current
Feed drive DC motor
Cutting depth 340 mm (800mm)
Saw blade max. 800 mm
Saw blade max. start 600 mm
Balde arbor 60 mm
Water Supply Centrally on both sides
Weight (Saw head) 24.9 kg
Dimensions W 380mm, H 280mm L 340mm

Features

Click to enlarge images

Flush cutting

Flush cutting

The mounting holes for flush cuts are drilled inner flange. It is not necessary Flush cutting flange.

Mounting brackets

Mounting brackets

The mounting brackets are made ​​of aluminum and steel. The bucks are in the longitudinal direction of pivotable to bridge any unevenness.

Feed / lowering

Feed / lowering

Feed speed forward or backward continuously.

Gamma

Gamma

Demco Wall Saw