Rellok RSB120 Joint Brushing Machine
The rotating brush (rotates in reverse direction), raises loose material from inside of the joint, such as slurry or small stones, to the front. The result is a largely dust-free joint, which forms the basis for the durability of the sealing compound to be poured into the joint in the next step.
Lateral steering movements are realized by a 360 degree swivel roll that is centrally located in front of the machine. This enables the machine to easily set up on the joint and also be move inside of the joint. Center of rotation is the rear axle.
For moving the RSB120 between two cuts, it can be tilted back onto another steering roller, which is attached to the frame. By doing this, the adjusted brushing depth can be maintained.
Features
• High-performance, low-vibration 2-cylinder drive motor
• Depth adjustment by means of a rocker system
• Large sized hand crank for depth adjustment, 8-fold adjustable
• Extra wide push handle with emergency stop, mounted in rubber bearings
• Low noise, sound power level is only 102 dB
Technical Data
| Max. brushing depth | 90mm |
| Diameter of brush | 250-300mm |
| Speed of cutting roller | 2890rpm |
| Bore hole of brush | 20mm |
| Input side of brush | right or left |
| Rotation direction of brush | counter direction |
| Max. mounting width | 30mm |
| Drive of brush | V-belt 3x XPZ direct |
| Cutting depth adjustment | Manual by hand crank |
| Output drive motor | 12kW (3600rpm) |
| Type of drive motor (petrol) | Briggs & Stratton Vanguard OHV 16HP |
| Motor start | Rope start |
| Feed | Manual |
| Dimensions* (l/w/h/) | 1300 / 600 / 970mm |
| Weight | 125kg |
Features
Click to enlarge images
RSB120 Rear view
RSB120
